About UV absorber plant

December 21, 2011
In recent years, with the destruction of the ozone layer, ultraviolet radiation reaching the ground the increasing intensity of UV damage on the human body has become increasingly serious. UV is the wavelength of 200 nlTI ~ 4O0 Bill's rays, according to different wavelengths, can be divided into UVC (200 Bill ~ 280 Bill), UVB (280 Bill ~ 320 nm), UVA (320 Ilm ~ 4OO Ilm) 3 districts segment, which UVc almost entirely blocked the atmosphere, the human body without causing harm. Real barrier through the atmospheric ozone and ultraviolet radiation reaching the earth's surface in the UVB accounts for 1%; UVA accounts for 99%. UVB causes sunburn erythema is a major factor, and UVA penetration is strong, it can penetrate the skin surface directly to the dermis, can cause severe tissue damage and even cause skin cancer. Therefore, as public awareness of sun protection, sunscreen and a variety of skin care products demand has also increased rapidly.
Used in cosmetics, sunscreen can be divided into two categories: one is the UV absorbers, for the organic compounds that can reduce or completely absorb UV radiation, but most is irritating and easy photosensitive material, UV protection for UVA segment not complete enough to join the higher the concentration of the possibility of skin irritation caused by the greater, and the resulting negative effects the more; other is UV screening agent for nanoscale Ti02, ZnO, astaxanthin in all Regional reflection and scattering UV light, because their photocatalytic activity and irritation, combined with easy to plug the holes too large, use the paint coating on the skin like the feeling of the potential problem does not disappear because of heavy use. So from a wide range of plant sources in a broad spectrum sunscreen filters and safe, and efficient development of active ingredients and make use of the cosmetics industry will be the 21st century on the main issue.
UV absorbers are often opaque material can absorb UV light, the amount of UV protection is based on the photophysical effect, that the incidence of these UV absorbers into the ultraviolet absorption and thermal vibration of molecules, and because of intramolecular excitation transferred between state level, can produce phosphorescence and fluorescence. Thus by UV absorption spectra of plant extracts of the test, biotin according to its UV absorption wavelength and absorbance values
​​can predict the effect of sunscreen.
Natural plant extracts in the UV region of the absorption of certain properties, but the absorption intensity varies. And compared to other types of plant extracts, flower extracts like most in the UV region has good absorption properties. Among them, rose, peony, hollyhock and hibiscus flower extract, 5 kinds of 250 nin ~ 320 nin in the strong absorption, rose the most (absorbance 7.62), but after the absorbance at 320 nn3 decreased, so these extract only has the role of anti-UVB ultraviolet rays. Azalea, pomegranate, hibiscus, carnations, osmanthus, honeysuckle and nasturtium extracts such as absorption in the UV region has the following characteristics: the 280 nin ~ 360 r. m absorption strong, 360 nin decreased significantly after the absorbance at 400 r. absorbance less than 0.3 m, indicating that such extracts in the short-wave UVA and UVB absorption region is better, not only for UVB absorbers UVA absorbers can also be made, but the UVA protection is incomplete. In the ultraviolet region (280 nin ~ 400 nm) has good absorption are: yellow hollyhock, Sophora japonica, Saussurea superba, so these three flower extract has broad-spectrum sun protection properties. Source:http://www.cosprm.com
 

Magnesium and magnesium alloys

December 21, 2011
Magnesium and its alloys have many excellent physical and mechanical properties, high specific strength and stiffness, easy cutting, easy to cast, good shock absorption and can withstand greater shock and vibration loads, good electrical and thermal conductivity, magnetic shielding performance, is an ideal modern structural materials, is now widely used in automobiles, machinery manufacturing, aerospace, electronics, telecommunications, military, optical instruments and computer manufacturing...
Continue reading...
 

Nonwoven bags in Japan

December 21, 2011
From the Earth's long-term plan for environmental protection and human point of view, the implementation of reusable shopping bags is a correct policy, it should be understand and support. On the other hand, some Chinese people's resistance may be environmentally friendly shopping bags designed not human, can not give consumers the convenience of shopping on. Chinese production of environmentally friendly shopping bags manufacturers should seriously think again. Learn about the experience of ...
Continue reading...
 

The development of bulk drugs market

December 20, 2011

The rapid changes in medical situation on the market for generic drugs bulk drugs (APIs) to open up the development of new production opportunities. New chemical body (NCEs) and more complex structure, promote technological progress and market development. Drug classification tend to be more precise result derived many of the emerging pharmaceutical market, but also to meet the treatment needs of the past can not be met. Traditional chemical to be support for the development of emerging biote...


Continue reading...
 

World Fine Chemical Market Analysis

December 20, 2011
According to reports, industry insiders believe that with the economic development and technological progress, the current fine chemical has entered the mature stage, the next 10 years the world will continue the rapid development of fine chemicals, development is not just a technology leap, but to technical strength, marketing skills and partnership with the user a perfect combination.
Chemical synthesis of fine chemicals began in 1856, the world's approximately 10 million kinds of synthetic ...

Continue reading...
 

Chinese metal powder production status in recent years

December 20, 2011
In recent years China's economy stable and rapid development. Automobile (motorcycle), household appliances, metallurgy, chemical and other major industries led to the development of powder metallurgy industry. Iron base, copper base metal powder as its raw material must achieve a great development. China iron production plant into production statistics has reached 30 units (more than a dozen small-scale production did not enter the statistics). Iron-based powder production has exceeded 2.2 m...
Continue reading...
 

Brief introduction of cosmetic raw materials

December 20, 2011
Cosmetics is a reasonable allocation from a variety of materials processed through the compound mixture. A wide range of cosmetic raw materials, performance varies. According to the performance and use of cosmetic raw materials, the matrix can be divided into two major categories of raw materials and auxiliary materials. The former is the subject of a class of cosmetic raw materials in cosmetic formulations account for a large proportion of the main function is to play the role of cosmetic su...
Continue reading...
 

About non-conductive vacuum metallization film

December 20, 2011
The so-called non-conductive vacuum metallization film, in essence, the product surface layer physical vapor deposition of metal or metal compound film, the surface of the product has a metallic luster and color and asked that the film has a greater resistance (not entirely non-conductive), the general White is not the silver-based conductive film, as well as part of the conductive film on the surface of silver is not a variety of color shading. Here, I mainly talk about the high demand for s...
Continue reading...
 

Market of china nonwoven bags

December 20, 2011
In January 8, 2008, China's State Council issued the "production and sales restrictions on the use of plastic shopping bags," which notice requirements from June 1, 2008 began the implementation of "plastic limit", a nationwide ban on China production, sale and use of less than 0.025 mm thick ultra-thin plastic shopping bags, and prohibit supermarkets, shopping malls, markets and other retail locations provide free plastic bags. The key words in the notice is "green, repeat and durable." Some...
Continue reading...
 

How natural about plant of skin care products

December 19, 2011
Women always want to stay the time in her face, so that they are not getting old. The vast land of flowers as a medium to fruit as a mediator, gave birth to such a number of wonderful plants, run support a flowery appearance. Natural ingredients extracted from plants in the botanical cosmetics is the most scientific and most environmentally friendly cosmetics. Natural plant cosmetics characterized as follows: the oil-water mixture, add all kinds of natural plant extracts nutrients cosmetics. ...
Continue reading...
 

Recent Posts