Showing Tag: "exporter" (Show all posts)

Advantages of fine nickel powder processing in Chinese plants

Posted by tracy ma on Wednesday, May 16, 2012, In : metal powder 

Developments of technologies for ultra-fine nickel powder have the three main points of preparation, properties and applications of ultrafine nickel powder. The preparation technology studies the preparation principle, preparation methods and preparation equipment. It aims at preparing a superior ultra-fine powder with characteristics of narrower particle size, more uniform distribution, better dispersion, and surface performances. Equipment has large production capacity, high output, low ene...


Continue reading ...
 

China Jilin focus on production of carbonyl iron powder, nickel powder and molybdenum

Posted by tracy ma on Saturday, April 28, 2012, In : fine chemicals 

The latest China Jilin metallurgical industry development plan proposed the development priorities and layout. The carbonyl iron powder, nickel powder, and molybdenum industry are included in key content. Carbonyl iron powder has the characteristics of high purity, ultra-fine and active. It is produced by the carbonylation metallurgical techniques and it can be widely used in metallurgy, electronics, military, mechanical, pharmaceutical, chemical, food and other fields. The project is expecte...


Continue reading ...
 

Burning heat measurement of boron powder

Posted by tracy ma on Thursday, April 26, 2012, In : metal powder 

Due to the high volume calorific value, boron becomes the preferred high-energy component additives. In order to do more accurate measurements, the oxygen bomb calorimeter can be used. The SQ-2 can be used as a combustion accelerant. The quality, shape, and the oxygen bomb pressure on the boron powder can be studied. The test finds the gas temperature is the key parameters that affect the combustion efficiency of boron powder. Increasing the limit temperature is an effective means to improve ...


Continue reading ...
 

The role of metal powder metallurgy technology

Posted by tracy ma on Monday, April 23, 2012, In : metal powder 

New materials refer to those emerging or developing materials with traditional materials’ excellent performance. It can be seen from the history of human technological development that the modern world has experienced two industrial revolutions which are based on the discovery and application of new materials. Since the middle of last century, electronic technology especially the invention and application of microelectronic technology is representative of the second world revolution. Silico...


Continue reading ...
 

Particularity of powder coating and coating application requirements

Posted by tracy ma on Thursday, April 19, 2012, In : metal powder 

Metal powder coating is a new type of 100% solid powder coating without solvent. It has two categories: the thermoplastic powder coatings and thermoset powder coating. Coating is made of special resin, fillers, curing agents and other additives. It forms with a certain proportion of mixed and by hot extrusion and crushing process of sifting. At room temperature, it is stable for storage. With electrostatic spray or fluidized bed dipping and then the baking heat of melting and solidification, ...


Continue reading ...
 

Silica fume is one kind of common refractory raw material

Posted by tracy ma on Friday, April 13, 2012, In : metal powder 

As early as the 1920s, people had the actual use of refractory concrete. But it was not until the late 1950s that microsilica was used in products. The standard combination of low-cement pouring compound oxidation system is composed by the calcium aluminate cement, silicon powder and alumina calcined poured dispersant with fine grinding. At the base of bonding system, people can conduct a variety of improvements and increasing. Because particles of silica powder in the combination system is u...


Continue reading ...
 

Iron metal desulfurization process will become the competition focus for powder metallurgy industry

Posted by tracy ma on Monday, April 9, 2012, In : metal powder 

As a main raw material in metal powder manufacturing industry, China's annual demand for steel is very large. The sulfur content of the steel determines the quality of steel, which is due to the characteristics of sulfur. If the sulfur content in the steel is too much, it will lead to the high brittle of steel thus reducing the mechanical properties of steel. Therefore, one process of forging steel is iron metal pretreatment. The sulfur containing in the molten iron goes into a minimum. Then ...


Continue reading ...
 

Machining of powder metallurgy parts

Posted by tracy ma on Friday, April 6, 2012, In : metal powder 

Powder metallurgy is craft technology which uses metal powder as raw material for sinter forming and manufactures metallic friction material and the products. In powder metallurgy production, materials and parts have futures of high quality, low cost, energy efficiency and saving materials. The product structure of powder metallurgy materials can be divided into the powder metallurgy machine parts and ferrite magnetic material. They include eternal life magnet magnetic materials, soft magnet ...


Continue reading ...
 

Application of silica fume in tire formulations

Posted by tracy ma on Thursday, April 5, 2012, In : metal powder 

The silicon dioxide powder is waste items collected from the ferrosilicon smelting process. The smelting silicon dust derived from the dry cleaning equipment with high silica content, high activity, high performance and versatile. The silica fume is tested as a reinforcing agent in tire formulations. The silica fume is used in the tire tread and carcass rubber formulations for semi-finished products and finished application. The results show that the silicon dioxide as an inorganic filler has...


Continue reading ...
 

The comparison between metal powder coating and traditional paint

Posted by tracy ma on Wednesday, April 4, 2012, In : metal powder 

Because metal powder coating has excellent performance, its market share is steadily improving. As the requirement of increasingly stringent environmental laws on the atmosphere volatile organic compounds content, the coating industry finds ways to improve the coating technology and reduces environmental pollution. After long-term experiments and tests, they finally find the silicon powder coating technology which is able to achieve the best coating.

Metal powder coating does not use organi...


Continue reading ...
 

Application of powder metallurgy technology in steel cycle economic

Posted by tracy ma on Tuesday, April 3, 2012, In : metal powder 

China's iron and steel industry has the rapid development in recent years. Crude steel production reached 5.65 million tons in 2009. There are very rich iron secondary resources. The annually production is about 1000 tons. How to use these resources reasonable and effective by powder metallurgy technology and realize the recycling of iron resources become major issues in the current recycling economy.

The iron is basic raw material in powder metallurgy industry. The world attaches great imp...


Continue reading ...
 

Manganese powder may have a negative role in human body

Posted by tracy ma on Tuesday, March 27, 2012, In : metal powder 

Manganese is a gray metal which is hard and brittle. Common manganese compounds are manganese dioxide and manganese oxide, manganese chloride, manganese sulfate, calcium chromate, manganese compounds and calcium potassium acetate. Manganese and manganese fumes dust enter into the body through the respiratory tract,, which  cause boron powder chronic poisoning. Acute manganese poisoning is rare.

After inhaling a large number of neonatal manganese fumes in poorly ventilated workplace fever: di...


Continue reading ...
 

Market trends and prediction of silica fume

Posted by tracy ma on Monday, March 26, 2012, In : metal powder 

Recently, prices have been increasing in silica fume market. resource of high-quality silica fume (silica content is more than 90%) constraints and the international market has continuous expanding demand for micro-silica fume. According to the different origin of silica fume and different purposes, the prices of silicon powder also have some differences. In general, the main producing area of ​​the silica fume is northwest. The quality is relatively poor with relatively large scale. Qual...


Continue reading ...
 

The ultra-fine powder processing industry has broad development prospects

Posted by tracy ma on Wednesday, March 7, 2012, In : metal powder 

Contemporary industrial production and manufacturing technology have profound changes. These changes have a common feature, which is the application of the original foundation material. The new ultrafine powder materials become upstream raw materials for most of the industrial manufacturing. It almost contains all production and manufacturing sectors of light and heavy industry. Currently, production processing and application level of ultrafine powder has become a measure sign for national s...


Continue reading ...
 

Chinese powder metallurgy industry should pay attention to weak capacity of export

Posted by tracy ma on Monday, March 5, 2012, In : metal powder 

As we all know, the trend of economic globalization is becoming more and more obvious. The economy of every country is integrated into the developing tide of economic globalization. Economic globalization makes the global capital and resources free circulating on a global scale. But meanwhile it has brought greater risks for national economy. Because economies of the countries are indeed affected by the whole situation.

The financial crisis of 2008 is a global financial crisis from U.S. subp...


Continue reading ...
 

Preparation of ultra-fine metal powder

Posted by tracy ma on Friday, December 16, 2011, In : metal powder 
For the small size and large surface area of ultra-fine metal powder, it has obtained a number of metal parts different from the conventional nature of the material, such as excellent mechanical properties, the special magnetic properties, high conductivity and diffusivity, high reaction activity and catalytic activity, etc. These special properties make ultra-fine metal powder materials in aerospace, ships, automobiles, metallurgy, chemical industry has been more widely used. For example, in...
Continue reading ...
 

Part of the technical application of powder metallurgy

Posted by tracy ma on Thursday, December 15, 2011, In : metal powder 
Metal powder is porous materials widely used in many things such as lightweight structural materials, high temperature filters, membranes, etc. The biggest market maybe is the smoke filtration device of diesel engine. Germany's Fraunhofer Institute has developed a metal hollow sphere preparation technique, the polymer substrate coated metal powder slurry, and then de-coating polymer matrix and binder, and finally sintered into a variety of metal sphere with a hollow structure . 1mm diameter s...
Continue reading ...
 

Overview About World Powder Metallurgy Industry

Posted by tracy ma on Wednesday, December 14, 2011, In : metal powder 
In 2003 the global total of about 880,000 tons cargo powder, which the United States accounted for 51%, Europe 18% Japan 13%, 18% in other countries and regions. Total iron powder for more than 90% of the total. Since 2001, world iron market continues to grow, an increase of nearly 4 years to 20%.
Automotive industry is still the largest powder metallurgy industrial development and the largest power users. On the one hand the increasing automobile production in the other hand, metal powder met...

Continue reading ...
 

Types and use of functional powder coatings

Posted by tracy ma on Tuesday, December 13, 2011, In : metal powder 
Powder coating to powder coating and coating pattern of the formation, solid points can amount to 100%, because do not use solvents, so can reduce the pollution of the environment and save resources, and has the recovery features. Functional powder coating is a special function, to provide special-use surface coating materials. It not only can play the traditional role of protection and decoration, also gives the material a variety of special features, including insulation, electrical conduct...
Continue reading ...
 

The use of brass

Posted by tracy ma on Monday, December 12, 2011, In : metal powder 
Brass is composed of copper and zinc alloy. If only by copper, zinc and called the general composition of the brass on brass. If it is made up of two or more elements of a variety of special alloy called brass. If the lead, tin, manganese, nickel, lead, iron, silicon alloy composed of copper. Brass has a strong wear resistance. Special brass called special brass, it is high strength, hardness, resistance to chemical corrosion. There machining of mechanical properties are more prominent. The p...
Continue reading ...
 

Variety of metal powder coatings and manufacturing processes

Posted by tracy ma on Friday, December 9, 2011, In : metal powder 
Metallic aluminum powder coating is the most important species of metal powder coating. Metallic aluminum powder coating according to appearance of the coating is divide into flat metallic coating, metal coating powder coating; film grain-like pattern, hammer and metal gloss texture powder coating. Can be used for metal aluminum powder coating film-forming materials are epoxy, polyester epoxy, polyester, polyurethane and acrylic resin, with the main varieties of domestic polyester resin, epox...
Continue reading ...
 

Manufacture of diamond tools for metal powder sintering

Posted by tracy ma on Thursday, December 8, 2011, In : metal powder 
Nowadays, diamond tools used in the manufacture of metal powder is mixed powder - except only cobalt powder. Cobalt powder in the sintered diamond tool used alone, without adding any other powder. Mixed metal powder composition as the use of diamond tools and different. Understandably, when the diamond saw blade when cutting hard granite metal powder and mix required for cutting soft marble is different also, hard steel for honing and dressing diamond tools used in silicon carbide grinding wh...
Continue reading ...
 

Brief introduction of metallic pigments

Posted by tracy ma on Wednesday, December 7, 2011, In : metal powder 
Metal is defined as: a unique sheen and opaque (to visible light reflected strong results), rich malleability, ductility and thermal conductivity, electrical conductivity of this type of material. Commonly used metals are aluminum powder, manganese powder, zinc powder, lead powder, metal powder alloy in the form of copper zinc powder (commonly known as powder), zinc aluminum, stainless steel powder.
Compared with other pigments, metallic pigments has its particularity. As the powder paint to m...

Continue reading ...
 

Short process of powder metallurgy technology

Posted by tracy ma on Tuesday, December 6, 2011, In : metal powder 
Technology of powder metallurgy parts near net shape powder metallurgy workers has long been one focus of the study subjects. Over the past decade, the study of new technology, new technology after another. These new technologies, the emergence of new technology to solve the short-flow low-cost powder metallurgy materials forming problems, greatly contributed to the rapid development of powder metallurgy parts. Currently, powder metallurgy parts manufacturing technology development is to incr...
Continue reading ...
 

The benefits of powder metallurgy

Posted by tracy ma on Monday, December 5, 2011, In : metal powder 
Powder metallurgy is a system of metal or metal powder (and non-metallic powder or metal powder mixture) as a raw material, forming and sintering, the manufacture of metal materials, composite and various types of products, technology. Production of ceramics and powder metallurgy method is somewhat similar, therefore, a series of powder metallurgy technology can also be used for the preparation of ceramic materials. As the advantages of powder metallurgy technology, it has become the key to s...
Continue reading ...
 

China Powder Metallurgy Industry Status

Posted by tracy ma on Friday, December 2, 2011, In : metal powder 
China Powder Metallurgy industry started in the early 1950s, basically with those of Japan, but in terms of its growth rate, significantly behind Japan, and North America, Europe, the gap is even greater. Experienced half a century of business development, on the basis of independent development, through the "75", "85", "95" technological innovation and technology transfer, that has developed a complete range of products, there is a certain scale of production and emerging scientific and tech...
Continue reading ...
 

The great potential of chinese powder metallurgy technology market

Posted by tracy ma on Thursday, December 1, 2011, In : metal powder 

The current Chinese auto parts enterprises not only face the fierce impact of multinational and domestic enterprises homogeneous competition, as well as the cost of raw materials and downstream extrusion host and distributors to continuously improve product quality standards. And most of China's auto parts business situation is the low level of specialization, product development ability. Enterprises do not have the vast majority of parts capabilities of product development, product developme...


Continue reading ...
 

Introduction of metal powder

Posted by tracy ma on Wednesday, November 30, 2011, In : metal powder 
Metal powder is less than 1mm of the metal particle size groups. Including single metal powders, metal alloy powder and a refractory nature of some of the compound powder, powder metallurgy is the main raw material.
Preparation of metal powders and application of ancient origin. Ancient times have used gold, silver, copper, bronze and some of its oxide powder to make paint for pottery, jewelry and other apparatus coloring, decoration. Early 20th century, Americans Kuli Ji (WDCoolidge) with hyd...

Continue reading ...
 

The basic formulation design of metal powder vibrating screen

Posted by tracy ma on Tuesday, November 29, 2011, In : metal powder 
Vibrating screen in the metal powder, especially the role of screening in the abrasive has no substitute! By following the basic metal powder coating formulations designed to look at the metal powder in the paint Vibrating screen application.
Metal powder coating formulation involves many factors, mainly the product of metal color (metallic paint varieties), film art effects (surface or texture), the production process (extrusion or dry mix), curing conditions (oven or bake Road, room temperat...

Continue reading ...
 

The concept of powder metallurgy

Posted by tracy ma on Monday, November 28, 2011, In : metal powder 
Powder metallurgy is a branch of metallurgy, which include: Preparation of metal powders; metal powder or metal powder and non-metallic powder mixtures, and the forming and sintering of metal and metal - non-metallic materials and products . Manufacture and use of metal powder, experienced a very long time. Early mechanical crushing method with the gold, silver, copper and bronze powder, pottery and other utensils used for more decorative coatings. Half of the 18th century and l19 hal...
Continue reading ...
 

Metal powder compacting the diamond head of circular saw blades

Posted by tracy ma on Friday, November 25, 2011,
Currently, the manufacture of diamond saw blades blade using powder metallurgy method common in foreign countries pressing process. There are several aspects of the process disadvantages: 1) the process used in manufacture of diamond cutter head ask for a higher grade; 2) suppress the head of the matrix metal powder formulation design and process requirements more stringent, or diamond-off phenomenon will very common, resulting in great waste; 3) diamond powder metallurgy production process w...
Continue reading ...
 

Thermal spray powder production technology and equipment

Posted by tracy ma on Thursday, November 24, 2011, In : metal powder 
In the welding industry, often use a variety of alloy powder. They are used for brazing various pure metals and alloy powders for thermal spraying of iron, nickel, cobalt-based alloy powder and other types for tubular welding wire alloy powder.
Thermal spraying is a surface enhancement technology, China has been the focus of the promotion of new technology projects. It uses electric arc, plasma arc, gas, a form of oxygen, heat, metal or non-metallic material is heated to a molten or semi-molte...

Continue reading ...
 

Introduction of metal powder injection molding technology

Posted by tracy ma on Wednesday, November 23, 2011, In : metal powder 
Metal Powder Injection Molding (referred to as MIM) is a modern plastic injection molding technology into the field of powder metallurgy and the formation of a new powder metallurgy near-net shape forming technology. The basic process is: First, the solid powder and organic binder uniform mixing, the pellet after heating plastics in the state (~ 150 ) with the spray forming into the mold cavity stereolithography machine, then use chemical or thermal decomposition method will be blank in th...
Continue reading ...
 

The rapid prototyping technology of metal powder

Posted by tracy ma on Tuesday, November 22, 2011, In : metal powder 
The rapid prototyping technology of metal powder is a advanced manufacturing technology which including computer-aided design, laser cladding, rapid prototyping, and it is the traditional processing methods of forming an important supplement. This paper systematically describes the metal powder the principle of laser rapid prototyping, system components and the latest research, and its development prospect.
Rapid prototyping technology is developed since 1987 an advanced manufacturing technolo...

Continue reading ...
 

Classification and wear solutions of automotive coatings

Posted by tracy ma on Monday, November 21, 2011, In : metal powder 

Owners should just hand the car will miss that period of time, if not super-luxury cars to run, beautiful car driving on the street is radiant, passers-by turned back to win. The good times are always short-lived, with a period of time, go through rain and wind, shifting sand, water, acid rain, bird droppings, industrial, dust, UV rays and other natural factors against, plus bad car wash (alkaline washing liquid, car wash scratches), frequent washing, waxing and other human factors, aging and...


Continue reading ...
 

Microwave sintering of metal powder technology

Posted by tracy ma on Friday, November 18, 2011, In : metal powder 

Microwave frequency is 300MHz-300GHz (corresponding to wavelengths in the 1000-1mm) range of electromagnetic waves. Microwave sintering is the use of microwave radiation plus heat source instead of the traditional material through their own absorption of electromagnetic energy to reach the sintering temperature to achieve densification. Compared with the traditional understanding - will block microwave radiation reflected from the metal, the metal in the powder state was able to achieve the e...


Continue reading ...
 

The process of laser sintering of metal powder

Posted by tracy ma on Thursday, November 17, 2011, In : metal powder 

Since the inception of rapid prototyping, rapid manufacturing of metal parts has become a remarkable research [1-3]. Including selective laser sintering (Selective Laser Sintering, referred to as SLS) technology for rapid metal parts can be manufactured much attention. So far, people mainly focused on two kinds of high melting point metal powder or metal powder blend to mix a binder, with a smaller laser power sintering of metal parts [4-5], while the use of high-power direct laser sintering ...


Continue reading ...
 

The main factors which affect the quality of metal powder pressed

Posted by tracy ma on Wednesday, November 16, 2011, In : metal powder 

Metal powder to suppress the main shall be guaranteed density and density distribution of the two indicators, depending on the mold pressing process and its parameters and structure of the rational design and selection.
In general, the performance of metal powder parts are its relative density (ie, the actual density of powder in the powder material with the ratio of the theoretical density) is closely related to the relative density is larger, the higher the performance. And specific parts of...


Continue reading ...
 

The global demand for metal powders is expected to reach $ 3.52 billion in 2012

Posted by tracy ma on Tuesday, November 15, 2011, In : metal powder 

The global demand for metal powders is expected to remain at 35 billion U.S. dollars in 2012, although the demand will grow 1.8% to reach 1.2 billion pounds. The reason is mainly due to metal prices will be lower than the high level of 2007; and 2002-2007 base metal powder, no significant change in demand.

Will increase the number of new uses for steel, stainless steel, aluminum and tungsten metal powder and other applications, such as powdered metal parts of motor vehicles in a wide range of ...


Continue reading ...
 

New type of metal powder coating

Posted by tracy ma on Monday, November 14, 2011, In : metal powder 

The traditional metal powder coatings by dry mixing, inorganic parcels, Bonding technology, there has been more technical problems. Compared with liquid coatings, powder coating of metal on metal paint spraying and curing time when the environment is not surrounded by the liquid solvent, leading to the following types of metal powder coatings FAQ: the rate of metal powder pigment and powder coating on the different color is not caused by stability, and recovery of pink color difference is too...


Continue reading ...
 

Something about Refractory metal in powder metallurgy

Posted by tracy ma on Wednesday, November 9, 2011, In : metal powder 

Refractory metals (mainly tungsten, molybdenum, tantalum, niobium) and alloys are produced in powder metallurgy method. And the main process of the refractory metals, especially tungsten, molybdenum materials, is powder metallurgy process.
   1903 German Bolton (W.vonBolton) obtained tantalum wire, as the incandescent filament. 1909 U.S. Kuli Ji (WDCoolidge) replaced with a tantalum powder obtained tungsten wire for incandescent lamps. Made in 1910 with the same process molybdenum wire, which ...


Continue reading ...
 

How to make the powder metal processing

Posted by tracy ma on Monday, November 7, 2011, In : metal powder 

In the latest design in automotive applications, powder metal processing parts have risen steadily. In fact, these parts are now being used more in the striking engine and transmission applications. Although the powder metal processing parts has become the automotive industry's favorite things, boron powder but must be processed into finished products for the workshop, they are still a demon, so the need to acquire a powder metal processing techniques.

 1, metal ceramics, carbide and powder me...


Continue reading ...
 

Practical techniques of metal powder coatings Notes

Posted by tracy ma on Friday, November 4, 2011, In : metal powder 

Metal powder coating is a metal-containing pigments (such as: copper powder(FCu), silver, aluminum, etc.) of powder coatings. As the metal powder coating to show a bright, luxurious decorative effect, very suitable for furniture, jewelry and cars indoors, spray the object outside. In the manufacturing process on the domestic market mainly by dry mixing method (Dry-Blending), also used the international bond fixation (Bonding).

    A method of coating metal powder coating

    Friction is general...


Continue reading ...
 

High Mill has excellent casting properties of cast iron

Posted by tracy ma on Thursday, November 3, 2011, In : metal powder 
High Pressure Mill is generally used in the manufacture of complex shape, high mechanical performance requirements than the cast iron parts, such as hydraulic press beams, rolling mill frame, heavy gear, etc., this method is difficult to produce parts with forged, cast iron can not meet performance requirements can only be used with carbon steel casting production. High Pressure Mill cast iron has excellent casting properties, machinability, antifriction and eliminate vibration and low notch ...
Continue reading ...
 

Metal ceramics powder metallurgical technology

Posted by tracy ma on Wednesday, November 2, 2011, In : metal powder 

Metal powder metallurgical technology ceramic materials mainly include ceramic materials metal powder metallurgical technology ultra fine cemented carbide, special hard phase hard alloy, of functionally gradient hard alloy, hard alloy heat treatment, coating hard alloy, new technology and new technology and new equipment, and Ti (C, N) fund of ceramic, etc.

1, metal ceramic materials of powder metallurgical technology submicron cemented carbides

To make the whole hard alloy material also has ex...


Continue reading ...
 

What is iron powder?

Posted by tracy ma on Tuesday, November 1, 2011, In : metal powder 
Iron powder is an important raw material metal powder. Iron extraction and industrial applications began in the 1920s. At that time the German production of electrolytic iron and carbonyl iron powder, mainly used as a catalyst for the chemical industry. 30 years to begin production of iron-based powder metallurgy parts. Vortex developed in Germany in 1933, the production of iron grinding. Swedish sponge iron production in 1936 based on the use of magnetite produced by the reduction of low-cos...
Continue reading ...
 

The technology and development prospects of powder metallurgy materials

Posted by tracy ma on Monday, October 31, 2011, In : metal powder 
Application of powder metallurgy materials and classification

(1) Application: (cars, motorcycles, textile machines, industrial sewing machines, electric tools, hardware, tools appliances. Construction machinery) and other powder metallurgy (iron copper) parts.

(2) Categories: Porous materials, powder metallurgy, powder metallurgy friction materials, friction materials, powder metallurgy, powder metallurgy structural parts, powder metallurgy tooling materials, magnetic materials, powder metallu...

Continue reading ...
 

Copper and copper alloy welding technology and equipment

Posted by tracy ma on Friday, October 28, 2011, In : metal powder 
1 copper has excellent electrical conductivity, thermal conductivity, corrosion resistance, ductility and strength of certain other features. In electrical, electronic, chemical, food, power, transportation and aerospace industry has been widely used. In the copper (copper powder(FCu)) to add more than 10 kinds of alloying elements to form a solid solution of various types of copper alloys, such as zinc for brass; nickel plus copper-nickel alloy; plus silicon-silicon bronze; Alcan aluminum br...
Continue reading ...
 

The application of beryllium copper and weight

Posted by tracy ma on Thursday, October 27, 2011, In : metal powder 
Now the plastic mold which has been more and more to start using beryllium copper mold materials, and an upward trend! Why? The following features on the beryllium copper we talk about a few!

1 sufficient hardness and strength: After many times of experimentation, engineers can identify and beryllium copper powder(FCu) master alloy the precipitation hardening of the best conditions and best working conditions there are the mass properties of beryllium copper (This is beryllium copper alloy pro...

Continue reading ...
 

The basic process and development of powder metallurgy process

Posted by tracy ma on Wednesday, October 26, 2011, In : metal powder 

Powder metallurgy process, the basic process is:

 1, the raw material powder preparation. Milling the existing methods can be roughly divided into two categories: mechanical and physical-chemical methods. The mechanical method can be divided into: mechanical grinding and spray method; physical-chemical methods are divided into: electro-chemical etching method, reduction, of legitimate, restore - of legal, vapor deposition, liquid deposition and electrolysis. metal powder supplier Which is the ...


Continue reading ...
 

Application of copper in the importance of analysis of powder metallurgy

Posted by tracy ma on Tuesday, October 25, 2011, In : metal powder 

In recent years, scholars pay more attention to powder metallurgy with "nano" and "composite" material properties, while ignoring the basic materials and technology in the field of powder metallurgy in the expanding role. Copper in the field of powder metallurgy played a huge role, will continue to promote its development. This paper describes the application of copper in the field of powder metallurgy and process development, reviewed the history of the development of copper, properties and ...


Continue reading ...
 
 

Recent Posts